At the start of my ideation process, I like to sit and look at the base car and then sketch ideas and draw lines to see what catches.

— HASTE
MAKE HASTE
CORP.
THE ESP
Design Study

Giving it a name

ESP comes from Esprit, but also from extrasensory perception—the suggestion of something visceral and beyond what you can immediately explain. I wanted the name to carry some of the feeling I was chasing in the design.

Naming a car matters to me. It gives an idea an identity, a soul. At some point it stops being a collection of lines and surfaces and starts becoming its own thing. The ESP has certainly done that.

FROM AN IDEA.
INTO THE WORLD.

An imagined Lotus

I have always loved wedge cars. The Lotus Esprit has that rare quality of feeling completely resolved, yet still leaving room for your imagination. It was already a masterpiece. I kept coming back to one question: what if Lotus had taken it into the wild world of Group C racing?

That was the beginning of the ESP. Like our other cars at Haste, it started as something we wished existed. We hoped that one day someone might want to build one of these ideas with us. This was probably the most extreme one to imagine becoming real.

Finding the lines

I began with pencil sketches and rough, low-poly models. I wanted to find the proportions before getting lost in detail. I would draw over the model, pass those annotations back, and keep pushing. There were roughly ten intensive rounds of revisions with additional modeling support from Michal Kukucka. Later, I substantially remodeled the car myself as the idea continued to change.

I wanted flat, angular, almost brutal forms, with the rear engineering exposed. Stealth aircraft were a constant reference. Photographing a Lamborghini Super Trofeo had also stayed with me: those harsh lines could still feel organic when they came together.

The front was the hardest part. It had to establish the entire character. Removing the headlights in the imagined race-car design helped me get closer to that feeling. I kept moving between the front, back and top, checking the proportions again and again.

An eye I trust

Carlos Pecino, Colorsponge, is my partner at Haste. We design our own cars, but we are always showing each other work, exchanging references and pushing one another. I want to make something that surprises him. His eye means a lot to me.

Carlos has been generous with his time, his feedback and his encouragement throughout the ESP. Having someone who understands both the work and the obsession behind it changes the experience. Even when the design is your own, the journey never feels solitary.

MAKE HASTE
CORP.
Photograph / The body shell on stands in the workshop.Fabian / Holyhall ↗︎

A shared ambition

I had admired Holyhall’s work before this project. Their earlier Zakspeed-inspired build showed a level of care that really stayed with me. We had been in touch, and later they reached out through Instagram about making the ESP real. Knowing what they were capable of made that proposal feel like a dream.

We do not always have the same words. There is a language barrier, but there is also a very clear shared understanding when we look at a shape, a proportion or a piece of work. Care translates. So does patience.

What I love is their willingness to take the time it needs. Fabian, Johannes, Kevin and Pascal have brought so much of themselves to this. They are not only building the car; they are documenting the work and letting people into the process. That ongoing story is part of the project.

Photograph / Working together across the fabrication table.Fabian / Holyhall ↗︎
Photograph / Welding during fabrication.Fabian / Holyhall ↗︎
Photograph / Sparks during metalwork.Fabian / Holyhall ↗︎

Translating the details

It is difficult to isolate one part of the physical car as the achievement. For me it is the whole thing: the greenhouse, the width, the metalwork, the relationship between the wheels and the body. It is all those tiny decisions I knew from sketches and renders, now occupying real space.

The wheel and tire proportions were a major challenge. HRE supported us with an unusual wheel solution that is integral to the car’s character. I am deeply grateful to them, and to Gabe Milori, for helping carry that part of the idea into the physical world.

A render can suggest something very quickly. Making it asks a different set of questions. Watching the team work through those questions has given me a new appreciation for every surface and every connection.

Photograph / Wheel and tire detail at Ultrace.Charlie Brenninkmeijer ↗︎
Photograph / Chassis and mechanical assemblies in the workshop.Fabian / Holyhall ↗︎
Photograph / Rear mechanical detail.Fabian / Holyhall ↗︎
Photograph / Rear wheel, suspension and bodywork of the physical ESP.Ash Thorp ↗︎
Photograph / Ash, Kyza and Carlos enjoying time in front of the ESP.Charlie Brenninkmeijer ↗︎

The first encounter

The first time Carlos and I saw the ESP in person was on the show floor at Ultrace, in the quiet before it opened. Not in the workshop. There it was, in front of us, with the team around it.

I went very quiet. I was close to crying. It is hard to explain what it feels like to stand beside something you have spent so much time imagining. I wanted the team to understand how much their work meant to me, even when I could not find the words.

Carlos was watching me take it in. He understood the work and the long road behind that moment. Being there together felt almost like a family gathering.

When people started arriving, I loved watching their expressions. Some understood it immediately. Some did not. For me, seeing someone connect with the artistic intention and then look again was its own reward.

Photograph / A direct view of the exposed rear.Ash Thorp ↗︎
Photograph / Visitors gathering around the car.Charlie Brenninkmeijer ↗︎

Looking at it again

Photographing the physical ESP felt strangely meta. I had spent so much time working in CGI, trying to bring a digital object closer to reality. Then I was standing in front of it with a camera, trying to capture a feeling.

When I render, I study photographs: the way clearcoat changes, the depth of dark carbon, the small imperfections that make an object believable. Now the thing I had imagined was giving something back through the lens.

It made me see both mediums differently. I could see limitations in the renders, but also the power CGI has to help us imagine something before it exists. Photography gave me another way to understand the car. The process had come around on itself.

Photograph / Side window louvers and door.Ash Thorp ↗︎
Photograph / Exposed rear wheel and chassis structure.Ash Thorp ↗︎
Photograph / Steering and interior details.Ash Thorp ↗︎
Photograph / Raised bodywork and chassis in the workshop.Fabian / Holyhall ↗︎

Still becoming

The ESP is still very much a work in progress. I love watching Holyhall learn new tools, stretch their skills and make thoughtful choices as it develops. There is no reason to rush past that part of the experience.

I see it as a one-of-one art car. Track days, shows and exhibitions are possibilities, but the destination is still being explored. Right now, the journey matters as much as any idea of a finished object.

Sometimes the question is simply: why? Because we can. Because curiosity is worth following. If there is something you want to make, something you think is rad, chase it. Find great people to make it with. Enjoy the work and the time together. This is what life is about.

Photograph / Chassis and mechanical assemblies in the workshop.Fabian / Holyhall ↗︎

Because we can.
Because curiosity is worth following.

Credits / With gratitude

Design
Ash Thorp ↗︎
Creators
Ash Thorp / Carlos Pecino (Colorsponge)
Creative partnership & feedback
Carlos Pecino (Colorsponge)
Additional 3D Subdiv Modeling
Michal Kukucka
Physical build & documentation
Holyhall ↗︎
Fabian, Johannes, Kevin & Pascal
Wheels / Sponsor & support
HRE Wheels ↗︎
Special thanks to Gabe Milori
Photography
Ash Thorp ↗︎
Charlie Brenninkmeijer ↗︎
Fabian / Holyhall ↗︎